Canddi

AutoCAD Shortcuts

AutoCAD shortcuts help you start familiar commands without repeatedly returning to the ribbon. The useful starting point is to distinguish a command alias, such as L for LINE, from a key combination, such as Ctrl + S to save. This guide covers a small set for everyday drafting and a practice routine for learning them.

Command aliases and shortcut keys

A command alias is an abbreviated command name entered at the Command prompt. Type the alias and press Enter, then follow the command’s prompts. A shortcut key runs an action through a key combination or function key. Autodesk explains the distinction in its guide to command aliases and shortcut keys.

For example, C starts CIRCLE with the default alias configuration. It does not mean Copy. Recording both the abbreviation and the full command name helps prevent this kind of mix-up.

Start with these command aliases

These defaults appear in Autodesk’s current AutoCAD shortcut guide. Custom aliases may differ.

Alias Command and purpose
L LINE: draw straight line segments
C CIRCLE: draw a circle
M MOVE: reposition objects
CO COPY: duplicate objects
RO ROTATE: rotate objects
TR TRIM: trim geometry

An alias starts the command; it does not supply the selection, points, distances or options that the operation needs. Read the next prompt before entering a value. If the wrong command starts, cancel it and check the full command name before continuing.

Useful shortcut keys in AutoCAD for Windows

The following defaults are listed in Autodesk’s keyboard commands and shortcuts reference, which also links to a downloadable reference.

  • Ctrl + S: save the drawing.
  • Ctrl + 1: show or hide the Properties palette.
  • Ctrl + 9: show or hide the Command Line.
  • F3: toggle object snap mode.
  • F8: toggle Ortho mode.
  • F10: toggle polar mode.
  • F11: toggle object snap tracking.
  • F12: toggle dynamic input.

These controls change how you draw or enter information. Check the relevant status before continuing instead of pressing a toggle repeatedly without looking at its result.

Check your platform and custom setup

AutoCAD for Mac uses different keyboard conventions in several places. Do not replace Ctrl with Command across an entire Windows list and assume the result will work. Autodesk’s current shortcut guide above includes Mac guidance and a link to its dedicated reference.

Aliases are defined in a product-specific PGP file; shortcut keys use a CUIx customisation file. If your team supplies a CAD configuration, check its assignments before changing them. Autodesk’s alias customisation instructions explain how to add or modify aliases and reload the PGP file.

Keep a copy of your existing configuration before experimenting. Make one change, test the result in a spare drawing and record it. This makes an unfamiliar workstation or a later reset easier to manage.

A short practice exercise

  1. Open a new practice drawing and save it under a clearly recognisable name.
  2. At an idle Command prompt, enter L and press Enter. Follow the prompts to draw a short line.
  3. Finish that command, then enter C and press Enter. Follow the prompts to create a circle.
  4. Use M to move the circle, watching the selection and point prompts.
  5. Use CO to make a copy. Compare the result with MOVE so the two actions are easy to distinguish.
  6. Save the drawing and write down the three aliases you want to practise next time.

Focus on understanding the prompts and checking the resulting geometry. Speed should follow familiarity with the drawing task.

About the original PDF

The shortcut and exercise PDF linked from the original 2016 article is no longer available at its published address. Use the on-page guide above and Autodesk’s linked reference for working alternatives.

Build accurate AutoCAD drafting skills

Explore Academy Class AutoCAD courses to develop your drawing, editing and documentation workflow. Contact the team for help choosing training for your experience and the drawings you need to produce.