From Iman, our trainer. This Revit demonstration covers level-head symbols, clear level names, creating a ground-floor level, and the difference between locking a distance and pinning a level.
Show level symbols at both ends
Open an elevation or section and select a level. For an individual adjustment, use the checkbox beside a level end to show or hide its bubble.
For consistent defaults, select the level and open Edit Type. Enable Symbol at End 1 Default and Symbol at End 2 Default as required. These are type properties: the change applies to levels using that type, rather than automatically imposing one appearance on every level type in the project. Check the result in your relevant views.
See Autodesk’s level type properties reference for the symbol options.
Rename levels and their corresponding views
Select the level name and enter a clear replacement. The video uses names such as Street Level, 00 Ground Floor and 01 First Floor; use your project’s naming convention.
When Revit asks whether to rename corresponding views, choose Yes if those view names should follow the level name. This renames associated views; it does not rename unrelated levels throughout the model. Check the Project Browser afterwards.
Add a ground-floor level
- In an elevation or section, select an existing level and choose Create Similar, or start the Level tool.
- Enable Make Plan View if the new level needs associated plans.
- Use Plan View Types to select the required view types rather than assuming the template’s defaults suit your project.
- Place the level, set its elevation using the project’s units, and give it a meaningful name.
- Finish the command and confirm the required plans in the Project Browser.
A level without a plan view is still a valid model datum. For more detail on adding a missing view, see levels and floor plans in Revit.
Use dimensions and pins for different purposes
Add dimensions between the levels to check the intended vertical spacing. The dimensions in the demonstration are examples, not standard storey heights: use your project’s actual dimensions and confirm its units before entering values.
A locked permanent dimension fixes the distance between its references. It does not, by itself, fix both levels at an absolute position. Unlock the dimension before changing that distance. Autodesk describes this in locking permanent dimensions.
To hold a level in place, select it and use Pin. Unpin it before an intentional move. Pinning is an editing control, not a permission system; review the effect on hosted elements and existing constraints before changing a level. See Autodesk’s Pin tool guidance.
Practise Revit with an instructor
Explore our Autodesk Revit courses for structured practice with modelling and project documentation.